A steel building kit in Washington State is priced as a materials package: the steel frame and cladding, plus whatever doors, windows, and fasteners the listing specifies. The listed price is where the project starts, not where it ends. Site work, concrete, assembly labor, engineered drawings, and permit applications all sit outside that number, and in Washington they are shaped by rules that change from one county to the next.
This page walks through what kit listings price, using one working seller's published numbers, what the gap between kit price and finished building covers, and the cases where a kit makes sense.
What a kit listing prices
Kit sellers publish two different numbers, and it pays to know which one you are looking at. One working Midwest builder, FBi Buildings, lists its "material pole barn kits" with prices labeled "materials only" — their own wording. A 24' x 32' x 10' kit lists at $14,799, plus tax and delivery; each kit comes with a detailed floor plan and a breakdown of the materials provided.
The same builder lists a constructed version of that same footprint at $41,774. That is the same 768 square feet built by their crew: roughly $19 per square foot for the materials alone versus roughly $54 per square foot finished. FBi serves the Midwest, so treat these as Midwest numbers; what transfers is the structure of the decision, not the dollar amounts.
FBi's own disclaimer makes the point as well as any critic could: final project costs vary based on "location, permitting requirements, snow load design, site conditions," and more. Those are exactly the parts of a Washington build a kit listing cannot price for you.
The gap between kit price and finished building
Between a materials package and a finished, permitted building sit the parts of the project the listing does not carry:
- Delivery and tax — already excluded from the materials price above, and they scale with distance and jurisdiction
- Site preparation — grading, drainage, and access, which vary more between two Washington parcels than almost any other factor
- Concrete — slabs, piers, and footings, mixed to your county's requirements
- Assembly labor and equipment — the crew, lifts, and tools to stand the frame and hang the panels, which most owners rent or hire
- Engineered drawings — the permit set most Washington jurisdictions expect, stamped for your site
- Permit applications — submitted to and tracked through your city or county
- Corrections — the cost when a first-time assembly meets wind-driven rain halfway through
- Your own time — the one input every kit buyer supplies
None of these are hidden fees. They are simply not materials, and a kit is a materials package. The question to answer before you buy is whether you want to carry them yourself.
Washington realities that never show up in a listing
Kit-market listings note that snow-load and wind certifications are required in Washington, and they are right to flag it: design requirements change from county to county, and the drawings that satisfy your jurisdiction need to be engineered for your site. That paperwork is contractor-side work on a ProBuilt project; on a kit build, it is yours to arrange before anything is submitted.
Then there is the weather. Framing a building during the wet season means keeping lumber and open framing protected while the shell comes together, and the faster a building closes in, the less the climate matters. A crew with lifts and a set sequence closes a shell in days; a first-time builder working weekends can spend a season getting there.
When a kit makes sense
A kit can be the right call: a small footprint, a flat and prepared site, an owner with the tools, the schedule, and the experience to assemble it, and a jurisdiction with a straightforward permit path. In those conditions a kit is cheaper, and no contractor will tell you otherwise.
The trouble is that most projects do not match all of those conditions at once. Sloped or soft ground, a county with detailed submittal requirements, a footprint large enough to need heavy equipment, or a build window that runs into October — each one moves work from the "you" column to the "hired help" column.
What a contractor build adds
A contractor-built project carries the whole list above as part of one scope: engineered drawings stamped for your site, permit applications handled, a crew with the equipment to close the shell quickly, and one party accountable for the finished structure. The structure itself is post-frame (large engineered posts and trusses carrying a building, with steel as the cladding), which is a different system from the welded rigid frames most steel kit sellers ship. We explain the difference in detail on our metal buildings page and in our guide to post-frame metal buildings.
If you are weighing the two paths, our permitting guide covers what Washington jurisdictions expect, and our process shows the sequence from scoping to completion.
The decision, made simple
Price the kit in full: add delivery, tax, site work, concrete, equipment, the permit set, and your weekends. Then price the contractor build the same way: one estimate, one scope, one crew. We build post-frame buildings across 17 Washington counties and provide free, no-obligation estimates for exactly this comparison. Bring us the kit's numbers and request an estimate for the same footprint; the two lists will tell you what you need to know.
TJ
Ready to Start Your Project?
Get a free quote on your metal building project. No obligation, no pressure.